This section covers some very technical items and it is strongly recommended that only experienced users should make any changes to the default settings. When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again. The information will be refreshed every 1 second. Page 22 If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated. If AC power is lost when system is not live, system will remain powered off. Enabled default Enable cache. Page 32 K8TA9 Note:
|Date Added:||20 June 2012|
|File Size:||9.97 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
It will disable the output on back panel audio connectors. This chipset manage bus speeds and access to system memory resources, such as DRAM. Disabled default Disables the function. When not disabled, each of the ranges are from 1 min.
Page 29 K8TA9 4.
If the signal has been triggered, it will record to the CMOS and show the message on next boot-up. Low Pin Count Interface. Unless you have the audii situation, you should disable this option.
Home | A9 Audio
We strongly recommend you verify every speed you overclock by click the Verify button. If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated. Select version supported by the operation system running on this computer.
CPU fan is rotated normally. Overclock Panel Click the Overclock button in Main Panel, the button will be highlighted and the Overclock Panel will slide out to left as the following figure. Integrate hardware monitor functions. Overclock Panel contains the these features: Biostar k8nha pro motherboard: So, if the AGP driver of the VGA card does not support the initialization feature, the display may work audioo or not function after S3.
Disabled default Virus protection is disabled. Re-install applications and data using backup disks. In this panel, you can get the real-time status information of your system. Enabled Enables the function. Page 31 K8TA9 6. By pressing ‘print’ button you will print only current page.
Biostar K8T890-A9 User Manual
It’s a community-based project which helps to repair anything. Reformat the hard drive. A confirmation message will be displayed before defaults are set. The BIOS has been recovered and will work properly. PCI Delay Transaction The chipset has an embedded bit posted write buffer to support delay transactions cycles. It should also support the wake-up on LAN jump.
When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again. Continuous defaultDiscrete. Date of Month You can choose which month the system will boot up. The IDE connectors can connect a master and a slave drive, so you can connect up to four hard disk drives.
Clear the CMOS data. Ajdio section covers some very technical items and it is strongly recommended that only experienced users should make any changes to the default settings. The CPU will fit only in the correct orientation.
The vendor makes no representations or warranties with respect to the.